zaremate/Ender-3V3-SE
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add files via upload

Browse Source
This commit is contained in:
TomasekJ 2024-07-23 19:13:04 +02:00 committed by GitHub
parent e7b2bad8ff
commit 13d9220587
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
2 changed files with 16 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
Marlin/Configuration.h
View File

@ -515,15 +515,15 @@
// Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures.
// (Use MINTEMP for thermistor short/failure protection.)
#define HEATER_0_MAXTEMP 275
#define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
#define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275
#define HEATER_6_MAXTEMP 275
#define HEATER_7_MAXTEMP 275
#define BED_MAXTEMP 110
#define HEATER_0_MAXTEMP 315
#define HEATER_1_MAXTEMP 315
#define HEATER_2_MAXTEMP 315
#define HEATER_3_MAXTEMP 315
#define HEATER_4_MAXTEMP 315
#define HEATER_5_MAXTEMP 315
#define HEATER_6_MAXTEMP 315
#define HEATER_7_MAXTEMP 315
#define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 60
/**
@ -872,11 +872,11 @@
* Override with M203
* X, Y, Z, E0 [, E1[, E2...]]
*/
#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 30 }
#define DEFAULT_MAX_FEEDRATE { 250, 250, 15, 30 }
#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
#if ENABLED(LIMITED_MAX_FR_EDITING)
#define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits
#define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 20, 50 } // ...or, set your own edit limits
#endif
/**
@ -887,7 +887,7 @@
*/
#if ENABLED(HIGH_SPEED_1)
// #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 }
#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 }
#define DEFAULT_MAX_ACCELERATION { 3000, 2000, 100, 4000 }
#else
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 }
// #define DEFAULT_MAX_ACCELERATION { 1500, 1500, 100, 1500 }
@ -1161,11 +1161,11 @@
#define XY_PROBE_FEEDRATE (160*60)//(80*60)
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_FEEDRATE_FAST (10*60)
#define Z_PROBE_FEEDRATE_FAST (15*60)
// #define Z_PROBE_FEEDRATE_FAST (4*60)
// Feedrate (mm/min) for the "accurate" probe of each point
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 3)
/**
* Probe Activation Switch

4
Marlin/Configuration_adv.h
View File

@ -1924,10 +1924,10 @@
*
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
*/
// #define LIN_ADVANCE
#define LIN_ADVANCE
#if ENABLED(LIN_ADVANCE)
//#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
#define LIN_ADVANCE_K 0.2 //0.06 // Unit: mm compression per 1mm/s extruder speed
#define LIN_ADVANCE_K 0.045 //0.06 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration
#endif