First commit for Ender-3V3 SE
First commit for Ender-3V3 SE
This commit is contained in:
CrealityTech
@@ -0,0 +1,520 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#include "../gcode.h"
|
||||
|
||||
#include "../../module/stepper.h"
|
||||
#include "../../module/endstops.h"
|
||||
|
||||
#if HAS_MULTI_HOTEND
|
||||
#include "../../module/tool_change.h"
|
||||
#endif
|
||||
|
||||
#if HAS_LEVELING
|
||||
#include "../../feature/bedlevel/bedlevel.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING)
|
||||
#include "../../feature/tmc_util.h"
|
||||
#endif
|
||||
|
||||
#include "../../module/probe.h"
|
||||
|
||||
#if ENABLED(BLTOUCH)
|
||||
#include "../../feature/bltouch.h"
|
||||
#endif
|
||||
|
||||
#include "../../lcd/marlinui.h"
|
||||
#if ENABLED(DWIN_CREALITY_LCD)
|
||||
#include "../../lcd/dwin/e3v2/dwin.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(EXTENSIBLE_UI)
|
||||
#include "../../lcd/extui/ui_api.h"
|
||||
#endif
|
||||
|
||||
#if HAS_L64XX // set L6470 absolute position registers to counts
|
||||
#include "../../libs/L64XX/L64XX_Marlin.h"
|
||||
#endif
|
||||
|
||||
#if ENABLED(LASER_MOVE_G28_OFF)
|
||||
#include "../../feature/spindle_laser.h"
|
||||
#endif
|
||||
|
||||
#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
|
||||
#include "../../core/debug_out.h"
|
||||
|
||||
#if ENABLED(QUICK_HOME)
|
||||
|
||||
static void quick_home_xy() {
|
||||
|
||||
// Pretend the current position is 0,0
|
||||
current_position.set(0.0, 0.0);
|
||||
sync_plan_position();
|
||||
|
||||
const int x_axis_home_dir = TOOL_X_HOME_DIR(active_extruder);
|
||||
|
||||
const float mlx = max_length(X_AXIS),
|
||||
mly = max_length(Y_AXIS),
|
||||
mlratio = mlx > mly ? mly / mlx : mlx / mly,
|
||||
fr_mm_s = _MIN(homing_feedrate(X_AXIS), homing_feedrate(Y_AXIS)) * SQRT(sq(mlratio) + 1.0);
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING)
|
||||
sensorless_t stealth_states {
|
||||
tmc_enable_stallguard(stepperX)
|
||||
, tmc_enable_stallguard(stepperY)
|
||||
, false
|
||||
, false
|
||||
#if AXIS_HAS_STALLGUARD(X2)
|
||||
|| tmc_enable_stallguard(stepperX2)
|
||||
#endif
|
||||
, false
|
||||
#if AXIS_HAS_STALLGUARD(Y2)
|
||||
|| tmc_enable_stallguard(stepperY2)
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
do_blocking_move_to_xy(1.5 * mlx * x_axis_home_dir, 1.5 * mly * Y_HOME_DIR, fr_mm_s);
|
||||
|
||||
endstops.validate_homing_move();
|
||||
|
||||
current_position.set(0.0, 0.0);
|
||||
|
||||
#if ENABLED(SENSORLESS_HOMING) && DISABLED(ENDSTOPS_ALWAYS_ON_DEFAULT)
|
||||
tmc_disable_stallguard(stepperX, stealth_states.x);
|
||||
tmc_disable_stallguard(stepperY, stealth_states.y);
|
||||
#if AXIS_HAS_STALLGUARD(X2)
|
||||
tmc_disable_stallguard(stepperX2, stealth_states.x2);
|
||||
#endif
|
||||
#if AXIS_HAS_STALLGUARD(Y2)
|
||||
tmc_disable_stallguard(stepperY2, stealth_states.y2);
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif // QUICK_HOME
|
||||
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
|
||||
inline void home_z_safely() {
|
||||
DEBUG_SECTION(log_G28, "home_z_safely", DEBUGGING(LEVELING));
|
||||
|
||||
// Disallow Z homing if X or Y homing is needed
|
||||
if (homing_needed_error(_BV(X_AXIS) | _BV(Y_AXIS))) return;
|
||||
|
||||
sync_plan_position();
|
||||
|
||||
/**
|
||||
* Move the Z probe (or just the nozzle) to the safe homing point
|
||||
* (Z is already at the right height)
|
||||
*/
|
||||
constexpr xy_float_t safe_homing_xy = { Z_SAFE_HOMING_X_POINT, Z_SAFE_HOMING_Y_POINT };
|
||||
#if HAS_HOME_OFFSET
|
||||
xy_float_t okay_homing_xy = safe_homing_xy;
|
||||
okay_homing_xy -= home_offset;
|
||||
#else
|
||||
constexpr xy_float_t okay_homing_xy = safe_homing_xy;
|
||||
#endif
|
||||
|
||||
destination.set(okay_homing_xy, current_position.z);
|
||||
|
||||
TERN_(HOMING_Z_WITH_PROBE, destination -= probe.offset_xy);
|
||||
|
||||
if (position_is_reachable(destination)) {
|
||||
|
||||
if (DEBUGGING(LEVELING)) DEBUG_POS("home_z_safely", destination);
|
||||
|
||||
// Free the active extruder for movement
|
||||
TERN_(DUAL_X_CARRIAGE, idex_set_parked(false));
|
||||
|
||||
TERN_(SENSORLESS_HOMING, safe_delay(500)); // Short delay needed to settle
|
||||
|
||||
do_blocking_move_to_xy(destination);
|
||||
homeaxis(Z_AXIS);
|
||||
}
|
||||
else {
|
||||
LCD_MESSAGEPGM(MSG_ZPROBE_OUT);
|
||||
SERIAL_ECHO_MSG(STR_ZPROBE_OUT_SER);
|
||||
}
|
||||
}
|
||||
|
||||
#endif // Z_SAFE_HOMING
|
||||
|
||||
#if ENABLED(IMPROVE_HOMING_RELIABILITY)
|
||||
|
||||
slow_homing_t begin_slow_homing() {
|
||||
slow_homing_t slow_homing{0};
|
||||
slow_homing.acceleration.set(planner.settings.max_acceleration_mm_per_s2[X_AXIS],
|
||||
planner.settings.max_acceleration_mm_per_s2[Y_AXIS]);
|
||||
planner.settings.max_acceleration_mm_per_s2[X_AXIS] = 100;
|
||||
planner.settings.max_acceleration_mm_per_s2[Y_AXIS] = 100;
|
||||
#if HAS_CLASSIC_JERK
|
||||
slow_homing.jerk_xy = planner.max_jerk;
|
||||
planner.max_jerk.set(0, 0);
|
||||
#endif
|
||||
planner.reset_acceleration_rates();
|
||||
return slow_homing;
|
||||
}
|
||||
|
||||
void end_slow_homing(const slow_homing_t &slow_homing) {
|
||||
planner.settings.max_acceleration_mm_per_s2[X_AXIS] = slow_homing.acceleration.x;
|
||||
planner.settings.max_acceleration_mm_per_s2[Y_AXIS] = slow_homing.acceleration.y;
|
||||
TERN_(HAS_CLASSIC_JERK, planner.max_jerk = slow_homing.jerk_xy);
|
||||
planner.reset_acceleration_rates();
|
||||
}
|
||||
|
||||
#endif // IMPROVE_HOMING_RELIABILITY
|
||||
|
||||
/**
|
||||
* G28: Home all axes according to settings
|
||||
*
|
||||
* Parameters
|
||||
*
|
||||
* None Home to all axes with no parameters.
|
||||
* With QUICK_HOME enabled XY will home together, then Z.
|
||||
*
|
||||
* O Home only if position is unknown
|
||||
*
|
||||
* Rn Raise by n mm/inches before homing
|
||||
*
|
||||
* Cartesian/SCARA parameters
|
||||
*
|
||||
* X Home to the X endstop
|
||||
* Y Home to the Y endstop
|
||||
* Z Home to the Z endstop
|
||||
*/
|
||||
void GcodeSuite::G28()
|
||||
{
|
||||
DEBUG_SECTION(log_G28, "G28", DEBUGGING(LEVELING));
|
||||
if (DEBUGGING(LEVELING)) log_machine_info();
|
||||
|
||||
TERN_(LASER_MOVE_G28_OFF, cutter.set_inline_enabled(false)); // turn off laser
|
||||
|
||||
TERN_(FULL_REPORT_TO_HOST_FEATURE, set_and_report_grblstate(M_HOMING));
|
||||
home_flag = true;
|
||||
HMI_flag.home_flag = true;
|
||||
#if ENABLED(DUAL_X_CARRIAGE)
|
||||
bool IDEX_saved_duplication_state = extruder_duplication_enabled;
|
||||
DualXMode IDEX_saved_mode = dual_x_carriage_mode;
|
||||
#endif
|
||||
|
||||
#if ENABLED(MARLIN_DEV_MODE)
|
||||
if (parser.seen_test('S')) {
|
||||
LOOP_LINEAR_AXES(a) set_axis_is_at_home((AxisEnum)a);
|
||||
sync_plan_position();
|
||||
SERIAL_ECHOLNPGM("Simulated Homing");
|
||||
report_current_position();
|
||||
return;
|
||||
}
|
||||
#endif
|
||||
|
||||
// Home (O)nly if position is unknown
|
||||
if (!axes_should_home() && parser.boolval('O')) {
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("> homing not needed, skip");
|
||||
return;
|
||||
}
|
||||
|
||||
TERN_(DWIN_CREALITY_LCD, DWIN_StartHoming());
|
||||
TERN_(EXTENSIBLE_UI, ExtUI::onHomingStart());
|
||||
|
||||
planner.synchronize(); // Wait for planner moves to finish!
|
||||
|
||||
SET_SOFT_ENDSTOP_LOOSE(false); // Reset a leftover 'loose' motion state
|
||||
|
||||
// Disable the leveling matrix before homing
|
||||
#if HAS_LEVELING
|
||||
const bool leveling_restore_state = parser.boolval('L', TERN(RESTORE_LEVELING_AFTER_G28, planner.leveling_active, ENABLED(ENABLE_LEVELING_AFTER_G28)));
|
||||
IF_ENABLED(PROBE_MANUALLY, g29_in_progress = false); // Cancel the active G29 session
|
||||
set_bed_leveling_enabled(false);
|
||||
#endif
|
||||
|
||||
// Reset to the XY plane
|
||||
TERN_(CNC_WORKSPACE_PLANES, workspace_plane = PLANE_XY);
|
||||
|
||||
// Count this command as movement / activity
|
||||
reset_stepper_timeout();
|
||||
|
||||
#define HAS_CURRENT_HOME(N) (defined(N##_CURRENT_HOME) && N##_CURRENT_HOME != N##_CURRENT)
|
||||
#if HAS_CURRENT_HOME(X) || HAS_CURRENT_HOME(X2) || HAS_CURRENT_HOME(Y) || HAS_CURRENT_HOME(Y2)
|
||||
#define HAS_HOMING_CURRENT 1
|
||||
#endif
|
||||
|
||||
#if HAS_HOMING_CURRENT
|
||||
auto debug_current = [](PGM_P const s, const int16_t a, const int16_t b){
|
||||
DEBUG_ECHOPGM_P(s); DEBUG_ECHOLNPAIR(" current: ", a, " -> ", b);
|
||||
};
|
||||
#if HAS_CURRENT_HOME(X)
|
||||
const int16_t tmc_save_current_X = stepperX.getMilliamps();
|
||||
stepperX.rms_current(X_CURRENT_HOME);
|
||||
if (DEBUGGING(LEVELING)) debug_current(PSTR("X"), tmc_save_current_X, X_CURRENT_HOME);
|
||||
#endif
|
||||
#if HAS_CURRENT_HOME(X2)
|
||||
const int16_t tmc_save_current_X2 = stepperX2.getMilliamps();
|
||||
stepperX2.rms_current(X2_CURRENT_HOME);
|
||||
if (DEBUGGING(LEVELING)) debug_current(PSTR("X2"), tmc_save_current_X2, X2_CURRENT_HOME);
|
||||
#endif
|
||||
#if HAS_CURRENT_HOME(Y)
|
||||
const int16_t tmc_save_current_Y = stepperY.getMilliamps();
|
||||
stepperY.rms_current(Y_CURRENT_HOME);
|
||||
if (DEBUGGING(LEVELING)) debug_current(PSTR("Y"), tmc_save_current_Y, Y_CURRENT_HOME);
|
||||
#endif
|
||||
#if HAS_CURRENT_HOME(Y2)
|
||||
const int16_t tmc_save_current_Y2 = stepperY2.getMilliamps();
|
||||
stepperY2.rms_current(Y2_CURRENT_HOME);
|
||||
if (DEBUGGING(LEVELING)) debug_current(PSTR("Y2"), tmc_save_current_Y2, Y2_CURRENT_HOME);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
TERN_(IMPROVE_HOMING_RELIABILITY, slow_homing_t slow_homing = begin_slow_homing());
|
||||
|
||||
// Always home with tool 0 active
|
||||
#if HAS_MULTI_HOTEND
|
||||
#if DISABLED(DELTA) || ENABLED(DELTA_HOME_TO_SAFE_ZONE)
|
||||
const uint8_t old_tool_index = active_extruder;
|
||||
#endif
|
||||
// PARKING_EXTRUDER homing requires different handling of movement / solenoid activation, depending on the side of homing
|
||||
#if ENABLED(PARKING_EXTRUDER)
|
||||
const bool pe_final_change_must_unpark = parking_extruder_unpark_after_homing(old_tool_index, X_HOME_DIR + 1 == old_tool_index * 2);
|
||||
#endif
|
||||
tool_change(0, true);
|
||||
#endif
|
||||
|
||||
TERN_(HAS_DUPLICATION_MODE, set_duplication_enabled(false));
|
||||
|
||||
remember_feedrate_scaling_off();
|
||||
|
||||
endstops.enable(true); // Enable endstops for next homing move
|
||||
|
||||
#if ENABLED(DELTA)
|
||||
|
||||
constexpr bool doZ = true; // for NANODLP_Z_SYNC if your DLP is on a DELTA
|
||||
|
||||
home_delta();
|
||||
|
||||
TERN_(IMPROVE_HOMING_RELIABILITY, end_slow_homing(slow_homing));
|
||||
|
||||
#elif ENABLED(AXEL_TPARA)
|
||||
|
||||
constexpr bool doZ = true; // for NANODLP_Z_SYNC if your DLP is on a TPARA
|
||||
|
||||
home_TPARA();
|
||||
|
||||
#else
|
||||
|
||||
const bool homeZ = parser.seen_test('Z'),
|
||||
needX = homeZ && TERN0(Z_SAFE_HOMING, axes_should_home(_BV(X_AXIS))),
|
||||
needY = homeZ && TERN0(Z_SAFE_HOMING, axes_should_home(_BV(Y_AXIS))),
|
||||
homeX = needX || parser.seen_test('X'), homeY = needY || parser.seen_test('Y'),
|
||||
home_all = homeX == homeY && homeX == homeZ, // All or None
|
||||
doX = home_all || homeX, doY = home_all || homeY, doZ = home_all || homeZ;
|
||||
|
||||
#if ENABLED(HOME_Z_FIRST)
|
||||
|
||||
if (doZ) homeaxis(Z_AXIS);
|
||||
|
||||
#endif
|
||||
|
||||
const float z_homing_height = parser.seenval('R') ? parser.value_linear_units() : Z_HOMING_HEIGHT;
|
||||
|
||||
if (z_homing_height && (doX || doY || TERN0(Z_SAFE_HOMING, doZ)))
|
||||
{
|
||||
// Raise Z before homing any other axes and z is not already high enough (never lower z)
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Raise Z (before homing) by ", z_homing_height);
|
||||
do_z_clearance(z_homing_height);
|
||||
TERN_(BLTOUCH, bltouch.init());
|
||||
}
|
||||
|
||||
#if ENABLED(QUICK_HOME)
|
||||
|
||||
if (doX && doY) quick_home_xy();
|
||||
|
||||
#endif
|
||||
|
||||
// Home Y (before X)
|
||||
if (ENABLED(HOME_Y_BEFORE_X) && (doY || TERN0(CODEPENDENT_XY_HOMING, doX)))
|
||||
homeaxis(Y_AXIS);
|
||||
|
||||
// Home X
|
||||
if (doX || (doY && ENABLED(CODEPENDENT_XY_HOMING) && DISABLED(HOME_Y_BEFORE_X))) {
|
||||
|
||||
#if ENABLED(DUAL_X_CARRIAGE)
|
||||
|
||||
// Always home the 2nd (right) extruder first
|
||||
active_extruder = 1;
|
||||
homeaxis(X_AXIS);
|
||||
|
||||
// Remember this extruder's position for later tool change
|
||||
inactive_extruder_x = current_position.x;
|
||||
|
||||
// Home the 1st (left) extruder
|
||||
active_extruder = 0;
|
||||
homeaxis(X_AXIS);
|
||||
|
||||
// Consider the active extruder to be in its "parked" position
|
||||
idex_set_parked();
|
||||
|
||||
#else
|
||||
|
||||
homeaxis(X_AXIS);
|
||||
|
||||
#endif
|
||||
}
|
||||
|
||||
// Home Y (after X)
|
||||
if (DISABLED(HOME_Y_BEFORE_X) && doY)
|
||||
homeaxis(Y_AXIS);
|
||||
|
||||
TERN_(IMPROVE_HOMING_RELIABILITY, end_slow_homing(slow_homing));
|
||||
|
||||
// Home Z last if homing towards the bed
|
||||
#if DISABLED(HOME_Z_FIRST)
|
||||
if (doZ)
|
||||
{
|
||||
#if EITHER(Z_MULTI_ENDSTOPS, Z_STEPPER_AUTO_ALIGN)
|
||||
stepper.set_all_z_lock(false);
|
||||
stepper.set_separate_multi_axis(false);
|
||||
#endif
|
||||
|
||||
TERN(Z_SAFE_HOMING, home_z_safely(), homeaxis(Z_AXIS));
|
||||
probe.move_z_after_homing();
|
||||
}
|
||||
#endif
|
||||
|
||||
sync_plan_position();
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Preserve DXC mode across a G28 for IDEX printers in DXC_DUPLICATION_MODE.
|
||||
* This is important because it lets a user use the LCD Panel to set an IDEX Duplication mode, and
|
||||
* then print a standard GCode file that contains a single print that does a G28 and has no other
|
||||
* IDEX specific commands in it.
|
||||
*/
|
||||
#if ENABLED(DUAL_X_CARRIAGE)
|
||||
|
||||
if (idex_is_duplicating()) {
|
||||
|
||||
TERN_(IMPROVE_HOMING_RELIABILITY, slow_homing = begin_slow_homing());
|
||||
|
||||
// Always home the 2nd (right) extruder first
|
||||
active_extruder = 1;
|
||||
homeaxis(X_AXIS);
|
||||
|
||||
// Remember this extruder's position for later tool change
|
||||
inactive_extruder_x = current_position.x;
|
||||
|
||||
// Home the 1st (left) extruder
|
||||
active_extruder = 0;
|
||||
homeaxis(X_AXIS);
|
||||
|
||||
// Consider the active extruder to be parked
|
||||
idex_set_parked();
|
||||
|
||||
dual_x_carriage_mode = IDEX_saved_mode;
|
||||
set_duplication_enabled(IDEX_saved_duplication_state);
|
||||
|
||||
TERN_(IMPROVE_HOMING_RELIABILITY, end_slow_homing(slow_homing));
|
||||
}
|
||||
|
||||
#endif // DUAL_X_CARRIAGE
|
||||
|
||||
endstops.not_homing();
|
||||
|
||||
// Clear endstop state for polled stallGuard endstops
|
||||
TERN_(SPI_ENDSTOPS, endstops.clear_endstop_state());
|
||||
|
||||
#if BOTH(DELTA, DELTA_HOME_TO_SAFE_ZONE)
|
||||
// move to a height where we can use the full xy-area
|
||||
do_blocking_move_to_z(delta_clip_start_height);
|
||||
#endif
|
||||
|
||||
TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_restore_state));
|
||||
// set_bed_leveling_enabled(true);
|
||||
|
||||
restore_feedrate_and_scaling();
|
||||
|
||||
// Restore the active tool after homing
|
||||
#if HAS_MULTI_HOTEND && (DISABLED(DELTA) || ENABLED(DELTA_HOME_TO_SAFE_ZONE))
|
||||
tool_change(old_tool_index, TERN(PARKING_EXTRUDER, !pe_final_change_must_unpark, DISABLED(DUAL_X_CARRIAGE))); // Do move if one of these
|
||||
#endif
|
||||
|
||||
#if HAS_HOMING_CURRENT
|
||||
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("Restore driver current...");
|
||||
#if HAS_CURRENT_HOME(X)
|
||||
stepperX.rms_current(tmc_save_current_X);
|
||||
#endif
|
||||
#if HAS_CURRENT_HOME(X2)
|
||||
stepperX2.rms_current(tmc_save_current_X2);
|
||||
#endif
|
||||
#if HAS_CURRENT_HOME(Y)
|
||||
stepperY.rms_current(tmc_save_current_Y);
|
||||
#endif
|
||||
#if HAS_CURRENT_HOME(Y2)
|
||||
stepperY2.rms_current(tmc_save_current_Y2);
|
||||
#endif
|
||||
#endif
|
||||
|
||||
ui.refresh();
|
||||
|
||||
|
||||
TERN_(EXTENSIBLE_UI, ExtUI::onHomingComplete());
|
||||
|
||||
|
||||
report_current_position();
|
||||
|
||||
// Enable automatic compensation function rock_2021.07.17
|
||||
process_subcommands_now_P(PSTR("M420 S1 Z10"));
|
||||
|
||||
if (ENABLED(NANODLP_Z_SYNC) && (doZ || ENABLED(NANODLP_ALL_AXIS)))
|
||||
SERIAL_ECHOLNPGM(STR_Z_MOVE_COMP);
|
||||
|
||||
TERN_(FULL_REPORT_TO_HOST_FEATURE, set_and_report_grblstate(M_IDLE));
|
||||
|
||||
#if HAS_L64XX
|
||||
// Set L6470 absolute position registers to counts
|
||||
// constexpr *might* move this to PROGMEM.
|
||||
// If not, this will need a PROGMEM directive and an accessor.
|
||||
static constexpr AxisEnum L64XX_axis_xref[MAX_L64XX] = {
|
||||
X_AXIS, Y_AXIS, Z_AXIS,
|
||||
X_AXIS, Y_AXIS, Z_AXIS, Z_AXIS,
|
||||
E_AXIS, E_AXIS, E_AXIS, E_AXIS, E_AXIS, E_AXIS
|
||||
};
|
||||
for (uint8_t j = 1; j <= L64XX::chain[0]; j++) {
|
||||
const uint8_t cv = L64XX::chain[j];
|
||||
L64xxManager.set_param((L64XX_axis_t)cv, L6470_ABS_POS, stepper.position(L64XX_axis_xref[cv]));
|
||||
}
|
||||
#endif
|
||||
//PRINT_LOG("(HMI_flag.abort_end_flag:",HMI_flag.abort_end_flag);
|
||||
if(!HMI_flag.abort_end_flag) TERN_(DWIN_CREALITY_LCD, DWIN_CompletedHoming()); //回零完成标志位
|
||||
// {
|
||||
// PRINT_LOG("checkkey3333:",checkkey);
|
||||
// DWIN_CompletedHoming();
|
||||
|
||||
// PRINT_LOG("(HMI_flag.abort_end_flag123:",HMI_flag.abort_end_flag);
|
||||
// }
|
||||
home_flag = false;
|
||||
// rock_21211104, Prevent back to zero operation after automatic leveling.
|
||||
HMI_flag.power_back_to_zero_flag = true;
|
||||
}
|
||||
Reference in New Issue
Block a user