zaremate/Ender-3V3-SE
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

First commit for Ender-3V3 SE

Browse Source 
First commit for Ender-3V3 SE
This commit is contained in:
CrealityTech
2024-07-10 13:47:44 +08:00
commit e7b2bad8ff
1869 changed files with 1519784 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/src/gcode/control/M10-M11.cpp
+44
View File
@@ -0,0 +1,44 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(AIR_EVACUATION)
#include "../gcode.h"
#include "../../feature/spindle_laser.h"
/**
* M10: Vacuum or Blower On
*/
void GcodeSuite::M10() {
cutter.air_evac_enable(); // Turn on Vacuum or Blower motor
}
/**
* M11: Vacuum or Blower OFF
*/
void GcodeSuite::M11() {
cutter.air_evac_disable(); // Turn off Vacuum or Blower motor
}
#endif // AIR_EVACUATION
Marlin/src/gcode/control/M108_M112_M410.cpp
+56
View File
@@ -0,0 +1,56 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if DISABLED(EMERGENCY_PARSER)
#include "../gcode.h"
#include "../../MarlinCore.h" // for wait_for_heatup, kill, M112_KILL_STR
#include "../../module/motion.h" // for quickstop_stepper
/**
* M108: Stop the waiting for heaters in M109, M190, M303. Does not affect the target temperature.
*/
void GcodeSuite::M108() {
TERN_(HAS_RESUME_CONTINUE, wait_for_user = false);
wait_for_heatup = false;
}
/**
* M112: Full Shutdown
*/
void GcodeSuite::M112() {
kill(M112_KILL_STR, nullptr, true);
}
/**
* M410: Quickstop - Abort all planned moves
*
* This will stop the carriages mid-move, so most likely they
* will be out of sync with the stepper position after this.
*/
void GcodeSuite::M410() {
quickstop_stepper();
}
#endif // !EMERGENCY_PARSER
Marlin/src/gcode/control/M111.cpp
+77
View File
@@ -0,0 +1,77 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
/**
* M111: Set the debug level
*/
void GcodeSuite::M111() {
if (parser.seen('S')) marlin_debug_flags = parser.byteval('S');
static PGMSTR(str_debug_1, STR_DEBUG_ECHO);
static PGMSTR(str_debug_2, STR_DEBUG_INFO);
static PGMSTR(str_debug_4, STR_DEBUG_ERRORS);
static PGMSTR(str_debug_8, STR_DEBUG_DRYRUN);
static PGMSTR(str_debug_16, STR_DEBUG_COMMUNICATION);
#if ENABLED(DEBUG_LEVELING_FEATURE)
static PGMSTR(str_debug_lvl, STR_DEBUG_LEVELING);
#endif
static PGM_P const debug_strings[] PROGMEM = {
str_debug_1, str_debug_2, str_debug_4, str_debug_8, str_debug_16,
TERN_(DEBUG_LEVELING_FEATURE, str_debug_lvl)
};
SERIAL_ECHO_START();
SERIAL_ECHOPGM(STR_DEBUG_PREFIX);
if (marlin_debug_flags) {
uint8_t comma = 0;
LOOP_L_N(i, COUNT(debug_strings)) {
if (TEST(marlin_debug_flags, i)) {
if (comma++) SERIAL_CHAR(',');
SERIAL_ECHOPGM_P((char*)pgm_read_ptr(&debug_strings[i]));
}
}
}
else {
SERIAL_ECHOPGM(STR_DEBUG_OFF);
#if !defined(__AVR__) || !defined(USBCON)
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
SERIAL_ECHOPAIR("\nBuffer Overruns: ", MYSERIAL1.buffer_overruns());
#endif
#if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
SERIAL_ECHOPAIR("\nFraming Errors: ", MYSERIAL1.framing_errors());
#endif
#if ENABLED(SERIAL_STATS_DROPPED_RX)
SERIAL_ECHOPAIR("\nDropped bytes: ", MYSERIAL1.dropped());
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
SERIAL_ECHOPAIR("\nMax RX Queue Size: ", MYSERIAL1.rxMaxEnqueued());
#endif
#endif // !__AVR__ || !USBCON
}
SERIAL_EOL();
}
Marlin/src/gcode/control/M120_M121.cpp
+34
View File
@@ -0,0 +1,34 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#include "../../module/endstops.h"
/**
* M120: Enable endstops and set non-homing endstop state to "enabled"
*/
void GcodeSuite::M120() { endstops.enable_globally(true); }
/**
* M121: Disable endstops and set non-homing endstop state to "disabled"
*/
void GcodeSuite::M121() { endstops.enable_globally(false); }
Marlin/src/gcode/control/M17_M18_M84.cpp
+71
View File
@@ -0,0 +1,71 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#include "../../MarlinCore.h" // for stepper_inactive_time, disable_e_steppers
#include "../../lcd/marlinui.h"
#include "../../module/stepper.h"
#if ENABLED(AUTO_BED_LEVELING_UBL)
#include "../../feature/bedlevel/bedlevel.h"
#endif
/**
* M17: Enable stepper motors
*/
void GcodeSuite::M17() {
if (parser.seen("XYZE")) {
if (parser.seen_test('X')) ENABLE_AXIS_X();
if (parser.seen_test('Y')) ENABLE_AXIS_Y();
if (parser.seen_test('Z')) ENABLE_AXIS_Z();
if (TERN0(HAS_E_STEPPER_ENABLE, parser.seen_test('E'))) enable_e_steppers();
}
else {
LCD_MESSAGEPGM(MSG_NO_MOVE);
enable_all_steppers();
}
}
/**
* M18, M84: Disable stepper motors
*/
void GcodeSuite::M18_M84() {
if (parser.seenval('S')) {
reset_stepper_timeout();
stepper_inactive_time = parser.value_millis_from_seconds();
}
else {
if (parser.seen("XYZE")) {
planner.synchronize();
if (parser.seen_test('X')) DISABLE_AXIS_X();
if (parser.seen_test('Y')) DISABLE_AXIS_Y();
if (parser.seen_test('Z')) DISABLE_AXIS_Z();
if (TERN0(HAS_E_STEPPER_ENABLE, parser.seen_test('E'))) disable_e_steppers();
}
else
{
HMI_flag.power_back_to_zero_flag=false;
planner.finish_and_disable();
}
TERN_(AUTO_BED_LEVELING_UBL, ubl.steppers_were_disabled());
}
}
Marlin/src/gcode/control/M211.cpp
+46
View File
@@ -0,0 +1,46 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfigPre.h"
#if HAS_SOFTWARE_ENDSTOPS
#include "../gcode.h"
#include "../../module/motion.h"
/**
* M211: Enable, Disable, and/or Report software endstops
*
* Usage: M211 S1 to enable, M211 S0 to disable, M211 alone for report
*/
void GcodeSuite::M211() {
const xyz_pos_t l_soft_min = soft_endstop.min.asLogical(),
l_soft_max = soft_endstop.max.asLogical();
SERIAL_ECHO_START();
SERIAL_ECHOPGM(STR_SOFT_ENDSTOPS);
if (parser.seen('S')) soft_endstop._enabled = parser.value_bool();
serialprint_onoff(soft_endstop._enabled);
print_pos(l_soft_min, PSTR(STR_SOFT_MIN), PSTR(" "));
print_pos(l_soft_max, PSTR(STR_SOFT_MAX));
}
#endif
Marlin/src/gcode/control/M226.cpp
+60
View File
@@ -0,0 +1,60 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(DIRECT_PIN_CONTROL)
#include "../gcode.h"
#include "../../MarlinCore.h" // for pin_is_protected and idle()
#include "../../module/stepper.h"
void protected_pin_err();
/**
* M226: Wait until the specified pin reaches the state required (M226 P<pin> S<state>)
*/
void GcodeSuite::M226() {
if (parser.seen('P')) {
const int pin_number = PARSED_PIN_INDEX('P', 0),
pin_state = parser.intval('S', -1); // required pin state - default is inverted
const pin_t pin = GET_PIN_MAP_PIN(pin_number);
if (WITHIN(pin_state, -1, 1) && pin > -1) {
if (pin_is_protected(pin))
protected_pin_err();
else {
int target = LOW;
planner.synchronize();
pinMode(pin, INPUT);
switch (pin_state) {
case 1: target = HIGH; break;
case 0: target = LOW; break;
case -1: target = !extDigitalRead(pin); break;
}
while (int(extDigitalRead(pin)) != target) idle();
}
} // pin_state -1 0 1 && pin > -1
} // parser.seen('P')
}
#endif // DIRECT_PIN_CONTROL
Marlin/src/gcode/control/M280.cpp
+54
View File
@@ -0,0 +1,54 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_SERVOS
#include "../gcode.h"
#include "../../module/servo.h"
/**
* M280: Get or set servo position. P<index> [S<angle>]
*/
void GcodeSuite::M280() {
if (!parser.seen('P')) return;
const int servo_index = parser.value_int();
if (WITHIN(servo_index, 0, NUM_SERVOS - 1)) {
if (parser.seen('S')) {
const int a = parser.value_int();
if (a == -1)
servo[servo_index].detach();
else
MOVE_SERVO(servo_index, a);
}
else
SERIAL_ECHO_MSG(" Servo ", servo_index, ": ", servo[servo_index].read());
}
else
SERIAL_ERROR_MSG("Servo ", servo_index, " out of range");
}
#endif // HAS_SERVOS
Marlin/src/gcode/control/M3-M5.cpp
+140
View File
@@ -0,0 +1,140 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_CUTTER
#include "../gcode.h"
#include "../../feature/spindle_laser.h"
#include "../../module/stepper.h"
/**
* Laser:
* M3 - Laser ON/Power (Ramped power)
* M4 - Laser ON/Power (Continuous power)
*
* Spindle:
* M3 - Spindle ON (Clockwise)
* M4 - Spindle ON (Counter-clockwise)
*
* Parameters:
* S<power> - Set power. S0 will turn the spindle/laser off, except in relative mode.
* O<ocr> - Set power and OCR (oscillator count register)
*
* If no PWM pin is defined then M3/M4 just turns it on.
*
* At least 12.8KHz (50Hz * 256) is needed for Spindle PWM.
* Hardware PWM is required on AVR. ISRs are too slow.
*
* NOTE: WGM for timers 3, 4, and 5 must be either Mode 1 or Mode 5.
* No other settings give a PWM signal that goes from 0 to 5 volts.
*
* The system automatically sets WGM to Mode 1, so no special
* initialization is needed.
*
* WGM bits for timer 2 are automatically set by the system to
* Mode 1. This produces an acceptable 0 to 5 volt signal.
* No special initialization is needed.
*
* NOTE: A minimum PWM frequency of 50 Hz is needed. All prescaler
* factors for timers 2, 3, 4, and 5 are acceptable.
*
* SPINDLE_LASER_ENA_PIN needs an external pullup or it may power on
* the spindle/laser during power-up or when connecting to the host
* (usually goes through a reset which sets all I/O pins to tri-state)
*
* PWM duty cycle goes from 0 (off) to 255 (always on).
*/
void GcodeSuite::M3_M4(const bool is_M4) {
auto get_s_power = [] {
if (parser.seenval('S')) {
const float spwr = parser.value_float();
#if ENABLED(SPINDLE_SERVO)
cutter.unitPower = spwr;
#else
cutter.unitPower = TERN(SPINDLE_LASER_PWM,
cutter.power_to_range(cutter_power_t(round(spwr))),
spwr > 0 ? 255 : 0);
#endif
}
else
cutter.unitPower = cutter.cpwr_to_upwr(SPEED_POWER_STARTUP);
return cutter.unitPower;
};
#if ENABLED(LASER_POWER_INLINE)
if (parser.seen('I') == DISABLED(LASER_POWER_INLINE_INVERT)) {
// Laser power in inline mode
cutter.inline_direction(is_M4); // Should always be unused
#if ENABLED(SPINDLE_LASER_PWM)
if (parser.seen('O')) {
cutter.unitPower = cutter.power_to_range(parser.value_byte(), 0);
cutter.inline_ocr_power(cutter.unitPower); // The OCR is a value from 0 to 255 (uint8_t)
}
else
cutter.inline_power(cutter.upower_to_ocr(get_s_power()));
#else
cutter.set_inline_enabled(true);
#endif
return;
}
// Non-inline, standard case
cutter.inline_disable(); // Prevent future blocks re-setting the power
#endif
planner.synchronize(); // Wait for previous movement commands (G0/G0/G2/G3) to complete before changing power
cutter.set_reverse(is_M4);
#if ENABLED(SPINDLE_LASER_PWM)
if (parser.seenval('O')) {
cutter.unitPower = cutter.power_to_range(parser.value_byte(), 0);
cutter.set_ocr_power(cutter.unitPower); // The OCR is a value from 0 to 255 (uint8_t)
}
else
cutter.set_power(cutter.upower_to_ocr(get_s_power()));
#elif ENABLED(SPINDLE_SERVO)
cutter.set_power(get_s_power());
#else
cutter.set_enabled(true);
#endif
cutter.menuPower = cutter.unitPower;
}
/**
* M5 - Cutter OFF (when moves are complete)
*/
void GcodeSuite::M5() {
#if ENABLED(LASER_POWER_INLINE)
if (parser.seen('I') == DISABLED(LASER_POWER_INLINE_INVERT)) {
cutter.set_inline_enabled(false); // Laser power in inline mode
return;
}
// Non-inline, standard case
cutter.inline_disable(); // Prevent future blocks re-setting the power
#endif
planner.synchronize();
cutter.set_enabled(false);
cutter.menuPower = cutter.unitPower;
}
#endif // HAS_CUTTER
Marlin/src/gcode/control/M350_M351.cpp
+64
View File
@@ -0,0 +1,64 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_MICROSTEPS
#include "../gcode.h"
#include "../../module/stepper.h"
/**
* M350: Set axis microstepping modes. S sets mode for all drivers.
*
* Warning: Steps-per-unit remains unchanged.
*/
void GcodeSuite::M350() {
if (parser.seen('S')) LOOP_LE_N(i, 4) stepper.microstep_mode(i, parser.value_byte());
LOOP_LOGICAL_AXES(i) if (parser.seen(axis_codes[i])) stepper.microstep_mode(i, parser.value_byte());
if (parser.seen('B')) stepper.microstep_mode(4, parser.value_byte());
stepper.microstep_readings();
}
/**
* M351: Toggle MS1 MS2 pins directly with axis codes X Y Z E B
* S# determines MS1, MS2 or MS3, X# sets the pin high/low.
*/
void GcodeSuite::M351() {
if (parser.seenval('S')) switch (parser.value_byte()) {
case 1:
LOOP_LOGICAL_AXES(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, parser.value_byte(), -1, -1);
if (parser.seenval('B')) stepper.microstep_ms(4, parser.value_byte(), -1, -1);
break;
case 2:
LOOP_LOGICAL_AXES(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, -1, parser.value_byte(), -1);
if (parser.seenval('B')) stepper.microstep_ms(4, -1, parser.value_byte(), -1);
break;
case 3:
LOOP_LOGICAL_AXES(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, -1, -1, parser.value_byte());
if (parser.seenval('B')) stepper.microstep_ms(4, -1, -1, parser.value_byte());
break;
}
stepper.microstep_readings();
}
#endif // HAS_MICROSTEPS
Marlin/src/gcode/control/M380_M381.cpp
+56
View File
@@ -0,0 +1,56 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
#include "../gcode.h"
#include "../../feature/solenoid.h"
#include "../../module/motion.h"
/**
* M380: Enable solenoid on the active extruder
*
* S<index> to specify a solenoid (Requires MANUAL_SOLENOID_CONTROL)
*/
void GcodeSuite::M380() {
#if ENABLED(MANUAL_SOLENOID_CONTROL)
enable_solenoid(parser.intval('S', active_extruder));
#else
enable_solenoid_on_active_extruder();
#endif
}
/**
* M381: Disable all solenoids if EXT_SOLENOID
* Disable selected/active solenoid if MANUAL_SOLENOID_CONTROL
*/
void GcodeSuite::M381() {
#if ENABLED(MANUAL_SOLENOID_CONTROL)
disable_solenoid(parser.intval('S', active_extruder));
#else
disable_all_solenoids();
#endif
}
#endif // EXT_SOLENOID || MANUAL_SOLENOID_CONTROL
Marlin/src/gcode/control/M400.cpp
+33
View File
@@ -0,0 +1,33 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#include "../../module/stepper.h"
/**
* M400: Finish all moves
*/
void GcodeSuite::M400() {
planner.synchronize();
}
Marlin/src/gcode/control/M42.cpp
+107
View File
@@ -0,0 +1,107 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(DIRECT_PIN_CONTROL)
#include "../gcode.h"
#include "../../MarlinCore.h" // for pin_is_protected
#if HAS_FAN
#include "../../module/temperature.h"
#endif
void protected_pin_err() {
SERIAL_ERROR_MSG(STR_ERR_PROTECTED_PIN);
}
/**
* M42: Change pin status via GCode
*
* P<pin> Pin number (LED if omitted)
* For LPC1768 specify pin P1_02 as M42 P102,
* P1_20 as M42 P120, etc.
*
* S<byte> Pin status from 0 - 255
* I Flag to ignore Marlin's pin protection
*
* M<mode> Pin mode: 0=INPUT 1=OUTPUT 2=INPUT_PULLUP 3=INPUT_PULLDOWN
*/
void GcodeSuite::M42() {
const int pin_index = PARSED_PIN_INDEX('P', GET_PIN_MAP_INDEX(LED_PIN));
if (pin_index < 0) return;
const pin_t pin = GET_PIN_MAP_PIN(pin_index);
if (!parser.boolval('I') && pin_is_protected(pin)) return protected_pin_err();
if (parser.seenval('M')) {
switch (parser.value_byte()) {
case 0: pinMode(pin, INPUT); break;
case 1: pinMode(pin, OUTPUT); break;
case 2: pinMode(pin, INPUT_PULLUP); break;
#ifdef INPUT_PULLDOWN
case 3: pinMode(pin, INPUT_PULLDOWN); break;
#endif
default: SERIAL_ECHOLNPGM("Invalid Pin Mode"); return;
}
}
if (!parser.seenval('S')) return;
const byte pin_status = parser.value_byte();
#if HAS_FAN
switch (pin) {
#if HAS_FAN0
case FAN0_PIN: thermalManager.fan_speed[0] = pin_status; return;
#endif
#if HAS_FAN1
case FAN1_PIN: thermalManager.fan_speed[1] = pin_status; return;
#endif
#if HAS_FAN2
case FAN2_PIN: thermalManager.fan_speed[2] = pin_status; return;
#endif
#if HAS_FAN3
case FAN3_PIN: thermalManager.fan_speed[3] = pin_status; return;
#endif
#if HAS_FAN4
case FAN4_PIN: thermalManager.fan_speed[4] = pin_status; return;
#endif
#if HAS_FAN5
case FAN5_PIN: thermalManager.fan_speed[5] = pin_status; return;
#endif
#if HAS_FAN6
case FAN6_PIN: thermalManager.fan_speed[6] = pin_status; return;
#endif
#if HAS_FAN7
case FAN7_PIN: thermalManager.fan_speed[7] = pin_status; return;
#endif
}
#endif
pinMode(pin, OUTPUT);
extDigitalWrite(pin, pin_status);
analogWrite(pin, pin_status);
}
#endif // DIRECT_PIN_CONTROL
Marlin/src/gcode/control/M605.cpp
+185
View File
@@ -0,0 +1,185 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if HAS_DUPLICATION_MODE
//#define DEBUG_DXC_MODE
#include "../gcode.h"
#include "../../module/motion.h"
#include "../../module/stepper.h"
#include "../../module/tool_change.h"
#include "../../module/planner.h"
#define DEBUG_OUT ENABLED(DEBUG_DXC_MODE)
#include "../../core/debug_out.h"
#if ENABLED(DUAL_X_CARRIAGE)
/**
* M605: Set dual x-carriage movement mode
*
* M605 S0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages.
*
* M605 S1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so that
* additional slicer support is not required.
*
* M605 S2 X R : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with "M605 S2" to initiate duplicated movement. For example, use "M605 S2 X100 R2" to
* make a copy 100mm to the right with E1 2° hotter than E0.
*
* M605 S3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis.
* The temperature differential and initial X offset must be set with "M605 S2 X[offs] R[deg]",
* then followed by "M605 S3" to initiate mirrored movement.
*
* M605 W : IDEX What? command.
*
* Note: the X axis should be homed after changing Dual X-carriage mode.
*/
void GcodeSuite::M605() {
planner.synchronize();
if (parser.seen('S')) {
const DualXMode previous_mode = dual_x_carriage_mode;
dual_x_carriage_mode = (DualXMode)parser.value_byte();
idex_set_mirrored_mode(false);
if (dual_x_carriage_mode == DXC_MIRRORED_MODE) {
if (previous_mode != DXC_DUPLICATION_MODE) {
SERIAL_ECHOLNPGM("Printer must be in DXC_DUPLICATION_MODE prior to ");
SERIAL_ECHOLNPGM("specifying DXC_MIRRORED_MODE.");
dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
return;
}
idex_set_mirrored_mode(true);
float x_jog = current_position.x - .1;
for (uint8_t i = 2; --i;) {
planner.buffer_line(x_jog, current_position.y, current_position.z, current_position.e, feedrate_mm_s, 0);
x_jog += .1;
}
return;
}
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE:
case DXC_AUTO_PARK_MODE:
break;
case DXC_DUPLICATION_MODE:
// Set the X offset, but no less than the safety gap
if (parser.seen('X')) duplicate_extruder_x_offset = _MAX(parser.value_linear_units(), (X2_MIN_POS) - (X1_MIN_POS));
if (parser.seen('R')) duplicate_extruder_temp_offset = parser.value_celsius_diff();
// Always switch back to tool 0
if (active_extruder != 0) tool_change(0);
break;
default:
dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
break;
}
idex_set_parked(false);
set_duplication_enabled(false);
#ifdef EVENT_GCODE_IDEX_AFTER_MODECHANGE
gcode.process_subcommands_now_P(PSTR(EVENT_GCODE_IDEX_AFTER_MODECHANGE));
#endif
}
else if (!parser.seen('W')) // if no S or W parameter, the DXC mode gets reset to the user's default
dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
#ifdef DEBUG_DXC_MODE
if (parser.seen('W')) {
DEBUG_ECHO_START();
DEBUG_ECHOPGM("Dual X Carriage Mode ");
switch (dual_x_carriage_mode) {
case DXC_FULL_CONTROL_MODE: DEBUG_ECHOPGM("FULL_CONTROL"); break;
case DXC_AUTO_PARK_MODE: DEBUG_ECHOPGM("AUTO_PARK"); break;
case DXC_DUPLICATION_MODE: DEBUG_ECHOPGM("DUPLICATION"); break;
case DXC_MIRRORED_MODE: DEBUG_ECHOPGM("MIRRORED"); break;
}
DEBUG_ECHOPAIR("\nActive Ext: ", active_extruder);
if (!active_extruder_parked) DEBUG_ECHOPGM(" NOT ");
DEBUG_ECHOPGM(" parked.");
DEBUG_ECHOPAIR("\nactive_extruder_x_pos: ", current_position.x);
DEBUG_ECHOPAIR("\ninactive_extruder_x: ", inactive_extruder_x);
DEBUG_ECHOPAIR("\nextruder_duplication_enabled: ", extruder_duplication_enabled);
DEBUG_ECHOPAIR("\nduplicate_extruder_x_offset: ", duplicate_extruder_x_offset);
DEBUG_ECHOPAIR("\nduplicate_extruder_temp_offset: ", duplicate_extruder_temp_offset);
DEBUG_ECHOPAIR("\ndelayed_move_time: ", delayed_move_time);
DEBUG_ECHOPAIR("\nX1 Home X: ", x_home_pos(0), "\nX1_MIN_POS=", X1_MIN_POS, "\nX1_MAX_POS=", X1_MAX_POS);
DEBUG_ECHOPAIR("\nX2 Home X: ", x_home_pos(1), "\nX2_MIN_POS=", X2_MIN_POS, "\nX2_MAX_POS=", X2_MAX_POS);
DEBUG_ECHOPAIR("\nX2_HOME_DIR=", X2_HOME_DIR, "\nX2_HOME_POS=", X2_HOME_POS);
DEBUG_ECHOPAIR("\nDEFAULT_DUAL_X_CARRIAGE_MODE=", STRINGIFY(DEFAULT_DUAL_X_CARRIAGE_MODE));
DEBUG_ECHOPAIR("\toolchange_settings.z_raise=", toolchange_settings.z_raise);
DEBUG_ECHOPAIR("\nDEFAULT_DUPLICATION_X_OFFSET=", DEFAULT_DUPLICATION_X_OFFSET);
DEBUG_EOL();
HOTEND_LOOP() {
DEBUG_ECHOPAIR_P(SP_T_STR, e);
LOOP_LINEAR_AXES(a) DEBUG_ECHOPAIR(" hotend_offset[", e, "].", AS_CHAR(AXIS_CHAR(a) | 0x20), "=", hotend_offset[e][a]);
DEBUG_EOL();
}
DEBUG_EOL();
}
#endif // DEBUG_DXC_MODE
}
#elif ENABLED(MULTI_NOZZLE_DUPLICATION)
/**
* M605: Set multi-nozzle duplication mode
*
* S2 - Enable duplication mode
* P[mask] - Bit-mask of nozzles to include in the duplication set.
* A value of 0 disables duplication.
* E[index] - Last nozzle index to include in the duplication set.
* A value of 0 disables duplication.
*/
void GcodeSuite::M605() {
bool ena = false;
if (parser.seen("EPS")) {
planner.synchronize();
if (parser.seenval('P')) duplication_e_mask = parser.value_int(); // Set the mask directly
else if (parser.seenval('E')) duplication_e_mask = pow(2, parser.value_int() + 1) - 1; // Set the mask by E index
ena = (2 == parser.intval('S', extruder_duplication_enabled ? 2 : 0));
set_duplication_enabled(ena && (duplication_e_mask >= 3));
}
SERIAL_ECHO_START();
SERIAL_ECHOPGM(STR_DUPLICATION_MODE);
serialprint_onoff(extruder_duplication_enabled);
if (ena) {
SERIAL_ECHOPGM(" ( ");
HOTEND_LOOP() if (TEST(duplication_e_mask, e)) { SERIAL_ECHO(e); SERIAL_CHAR(' '); }
SERIAL_CHAR(')');
}
SERIAL_EOL();
}
#endif // MULTI_NOZZLE_DUPLICATION
#endif // HAS_DUPICATION_MODE
Marlin/src/gcode/control/M7-M9.cpp
+87
View File
@@ -0,0 +1,87 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(COOLANT_CONTROL)
#include "../gcode.h"
#include "../../module/planner.h"
#if ENABLED(COOLANT_MIST)
/**
* M7: Mist Coolant On
*/
void GcodeSuite::M7() {
planner.synchronize(); // Wait for move to arrive
WRITE(COOLANT_MIST_PIN, !(COOLANT_MIST_INVERT)); // Turn on Mist coolant
}
#endif
#if ENABLED(COOLANT_FLOOD)
/**
* M8: Flood Coolant On
*/
void GcodeSuite::M8() {
planner.synchronize(); // Wait for move to arrive
WRITE(COOLANT_FLOOD_PIN, !(COOLANT_FLOOD_INVERT)); // Turn on Flood coolant
}
#endif
/**
* M9: Coolant OFF
*/
void GcodeSuite::M9() {
planner.synchronize(); // Wait for move to arrive
#if ENABLED(COOLANT_MIST)
WRITE(COOLANT_MIST_PIN, COOLANT_MIST_INVERT); // Turn off Mist coolant
#endif
#if ENABLED(COOLANT_FLOOD)
WRITE(COOLANT_FLOOD_PIN, COOLANT_FLOOD_INVERT); // Turn off Flood coolant
#endif
}
#endif // COOLANT_CONTROL
#if ENABLED(AIR_ASSIST)
#include "../gcode.h"
#include "../../module/planner.h"
#include "../../feature/spindle_laser.h"
/**
* M8: Air Assist On
*/
void GcodeSuite::M8() {
planner.synchronize();
cutter.air_assist_enable(); // Turn on Air Assist pin
}
/**
* M9: Air Assist Off
*/
void GcodeSuite::M9() {
planner.synchronize();
cutter.air_assist_disable(); // Turn off Air Assist pin
}
#endif // AIR_ASSIST
Marlin/src/gcode/control/M80_M81.cpp
+113
View File
@@ -0,0 +1,113 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#include "../../module/temperature.h"
#include "../../module/planner.h" // for planner.finish_and_disable
#include "../../module/printcounter.h" // for print_job_timer.stop
#include "../../lcd/marlinui.h" // for LCD_MESSAGEPGM_P
#include "../../inc/MarlinConfig.h"
#if HAS_SUICIDE
#include "../../MarlinCore.h"
#endif
#if ENABLED(PSU_CONTROL)
#if ENABLED(AUTO_POWER_CONTROL)
#include "../../feature/power.h"
#else
void restore_stepper_drivers();
#endif
// Could be moved to a feature, but this is all the data
bool powersupply_on;
#if HAS_TRINAMIC_CONFIG
#include "../../feature/tmc_util.h"
#endif
/**
* M80 : Turn on the Power Supply
* M80 S : Report the current state and exit
*/
void GcodeSuite::M80() {
// S: Report the current power supply state and exit
if (parser.seen('S')) {
SERIAL_ECHOPGM_P(powersupply_on ? PSTR("PS:1\n") : PSTR("PS:0\n"));
return;
}
PSU_ON();
/**
* If you have a switch on suicide pin, this is useful
* if you want to start another print with suicide feature after
* a print without suicide...
*/
#if HAS_SUICIDE
OUT_WRITE(SUICIDE_PIN, !SUICIDE_PIN_INVERTING);
#endif
#if DISABLED(AUTO_POWER_CONTROL)
safe_delay(PSU_POWERUP_DELAY);
restore_stepper_drivers();
TERN_(HAS_TRINAMIC_CONFIG, safe_delay(PSU_POWERUP_DELAY));
#endif
TERN_(HAS_LCD_MENU, ui.reset_status());
}
#endif // PSU_CONTROL
/**
* M81: Turn off Power, including Power Supply, if there is one.
*
* This code should ALWAYS be available for FULL SHUTDOWN!
*/
void GcodeSuite::M81() {
thermalManager.disable_all_heaters();
planner.finish_and_disable();
print_job_timer.stop();
#if HAS_FAN
thermalManager.zero_fan_speeds();
#if ENABLED(PROBING_FANS_OFF)
thermalManager.fans_paused = false;
ZERO(thermalManager.saved_fan_speed);
#endif
#endif
safe_delay(1000); // Wait 1 second before switching off
#if HAS_SUICIDE
suicide();
#elif ENABLED(PSU_CONTROL)
PSU_OFF_SOON();
#endif
LCD_MESSAGEPGM_P(PSTR(MACHINE_NAME " " STR_OFF "."));
}
Marlin/src/gcode/control/M85.cpp
+35
View File
@@ -0,0 +1,35 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
/**
* M85: Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
*/
void GcodeSuite::M85() {
if (parser.seen('S')) {
reset_stepper_timeout();
max_inactive_time = parser.value_millis_from_seconds();
}
}
Marlin/src/gcode/control/M993_M994.cpp
+88
View File
@@ -0,0 +1,88 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ALL(HAS_SPI_FLASH, SDSUPPORT, MARLIN_DEV_MODE)
#include "../gcode.h"
#include "../../sd/cardreader.h"
#include "../../libs/W25Qxx.h"
/**
* M993: Backup SPI Flash to SD
*/
void GcodeSuite::M993() {
if (!card.isMounted()) card.mount();
char fname[] = "spiflash.bin";
card.openFileWrite(fname);
if (!card.isFileOpen()) {
SERIAL_ECHOLNPAIR("Failed to open ", fname, " to write.");
return;
}
uint8_t buf[1024];
uint32_t addr = 0;
W25QXX.init(SPI_QUARTER_SPEED);
SERIAL_ECHOPGM("Save SPI Flash");
while (addr < SPI_FLASH_SIZE) {
W25QXX.SPI_FLASH_BufferRead(buf, addr, COUNT(buf));
addr += COUNT(buf);
card.write(buf, COUNT(buf));
if (addr % (COUNT(buf) * 10) == 0) SERIAL_CHAR('.');
}
SERIAL_ECHOLNPGM(" done");
card.closefile();
}
/**
* M994: Load a backup from SD to SPI Flash
*/
void GcodeSuite::M994() {
if (!card.isMounted()) card.mount();
char fname[] = "spiflash.bin";
card.openFileRead(fname);
if (!card.isFileOpen()) {
SERIAL_ECHOLNPAIR("Failed to open ", fname, " to read.");
return;
}
uint8_t buf[1024];
uint32_t addr = 0;
W25QXX.init(SPI_QUARTER_SPEED);
W25QXX.SPI_FLASH_BulkErase();
SERIAL_ECHOPGM("Load SPI Flash");
while (addr < SPI_FLASH_SIZE) {
card.read(buf, COUNT(buf));
W25QXX.SPI_FLASH_BufferWrite(buf, addr, COUNT(buf));
addr += COUNT(buf);
if (addr % (COUNT(buf) * 10) == 0) SERIAL_CHAR('.');
}
SERIAL_ECHOLNPGM(" done");
card.closefile();
}
#endif // HAS_SPI_FLASH && SDSUPPORT && MARLIN_DEV_MODE
Marlin/src/gcode/control/M997.cpp
+36
View File
@@ -0,0 +1,36 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#if ENABLED(PLATFORM_M997_SUPPORT)
/**
* M997: Perform in-application firmware update
*/
void GcodeSuite::M997() {
flashFirmware(parser.intval('S'));
}
#endif
Marlin/src/gcode/control/M999.cpp
+45
View File
@@ -0,0 +1,45 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#include "../../lcd/marlinui.h" // for lcd_reset_alert_level
#include "../../MarlinCore.h" // for marlin_state
#include "../queue.h" // for flush_and_request_resend
/**
* M999: Restart after being stopped
*
* Default behavior is to flush the serial buffer and request
* a resend to the host starting on the last N line received.
*
* Sending "M999 S1" will resume printing without flushing the
* existing command buffer.
*/
void GcodeSuite::M999() {
marlin_state = MF_RUNNING;
ui.reset_alert_level();
if (parser.boolval('S')) return;
queue.flush_and_request_resend(queue.ring_buffer.command_port());
}
Marlin/src/gcode/control/T.cpp
+70
View File
@@ -0,0 +1,70 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../gcode.h"
#include "../../module/tool_change.h"
#if EITHER(HAS_MULTI_EXTRUDER, DEBUG_LEVELING_FEATURE)
#include "../../module/motion.h"
#endif
#if HAS_PRUSA_MMU2
#include "../../feature/mmu/mmu2.h"
#endif
#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
#include "../../core/debug_out.h"
/**
* T0-T<n>: Switch tool, usually switching extruders
*
* F[units/min] Set the movement feedrate
* S1 Don't move the tool in XY after change
*
* For PRUSA_MMU2(S) and EXTENDABLE_EMU_MMU2(S)
* T[n] Gcode to extrude at least 38.10 mm at feedrate 19.02 mm/s must follow immediately to load to extruder wheels.
* T? Gcode to extrude shouldn't have to follow. Load to extruder wheels is done automatically.
* Tx Same as T?, but nozzle doesn't have to be preheated. Tc requires a preheated nozzle to finish filament load.
* Tc Load to nozzle after filament was prepared by Tc and nozzle is already heated.
*/
void GcodeSuite::T(const int8_t tool_index) {
DEBUG_SECTION(log_T, "T", DEBUGGING(LEVELING));
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("...(", tool_index, ")");
// Count this command as movement / activity
reset_stepper_timeout();
#if HAS_PRUSA_MMU2
if (parser.string_arg) {
mmu2.tool_change(parser.string_arg); // Special commands T?/Tx/Tc
return;
}
#endif
tool_change(tool_index
#if HAS_MULTI_EXTRUDER
, TERN(PARKING_EXTRUDER, false, tool_index == active_extruder) // For PARKING_EXTRUDER motion is decided in tool_change()
|| parser.boolval('S')
#endif
);
}