151 lines
		
	
	
		
			4.2 KiB
		
	
	
	
		
			TOML
		
	
	
	
	
	
			
		
		
	
	
			151 lines
		
	
	
		
			4.2 KiB
		
	
	
	
		
			TOML
		
	
	
	
	
	
 | 
						|
#Make sure config changes are duplicated on both Clients and the Server when running a dedicated Server,
 | 
						|
# as the config isnt synced between Clients and Server.
 | 
						|
#General Settings
 | 
						|
[general]
 | 
						|
	#Forge Energy conversion rate (in FE/t at 256 RPM, value is the FE/t generated and consumed is at 256rpm).
 | 
						|
	#Range: > 0
 | 
						|
	fe_at_max_rpm = 480
 | 
						|
	#Max stress for the Alternator and Electric Motor (in SU at 256 RPM).
 | 
						|
	#Range: > 0
 | 
						|
	max_stress = 16384
 | 
						|
	#If audio should be enabled or not.
 | 
						|
	audio_enabled = true
 | 
						|
 | 
						|
#Electric Motor
 | 
						|
[electric_motor]
 | 
						|
	#Electric Motor min/max RPM.
 | 
						|
	#Range: > 1
 | 
						|
	motor_rpm_range = 256
 | 
						|
	#Electric Motor minimum required energy consumption in FE/t.
 | 
						|
	#Range: > 0
 | 
						|
	motor_min_consumption = 8
 | 
						|
	#Electric Motor max input in FE (Energy transfer not consumption).
 | 
						|
	#Range: > 0
 | 
						|
	motor_max_input = 5000
 | 
						|
	#Electric Motor internal capacity in FE.
 | 
						|
	#Range: > 0
 | 
						|
	motor_capacity = 5000
 | 
						|
 | 
						|
#Alternator
 | 
						|
[alternator]
 | 
						|
	#Alternator max input in FE (Energy transfer, not generation).
 | 
						|
	#Range: > 0
 | 
						|
	generator_max_output = 5000
 | 
						|
	#Alternator internal capacity in FE.
 | 
						|
	#Range: > 0
 | 
						|
	generator_capacity = 5000
 | 
						|
	#Alternator efficiency relative to base conversion rate.
 | 
						|
	#Range: 0.01 ~ 1.0
 | 
						|
	generator_efficiency = 0.75
 | 
						|
 | 
						|
#Rolling Mill
 | 
						|
[rolling_mill]
 | 
						|
	#Rolling Mill duration in ticks.
 | 
						|
	#Range: > 0
 | 
						|
	rolling_mill_processing_duration = 120
 | 
						|
	#Rolling Mill base stress impact.
 | 
						|
	#Range: 0 ~ 1024
 | 
						|
	rolling_mill_stress = 8
 | 
						|
 | 
						|
#Wires
 | 
						|
[wires]
 | 
						|
	#Small Connector max input in FE/t (Energy transfer).
 | 
						|
	#Range: > 0
 | 
						|
	small_connector_max_input = 1000
 | 
						|
	#Small Connector max output in FE/t (Energy transfer).
 | 
						|
	#Range: > 0
 | 
						|
	small_connector_max_output = 1000
 | 
						|
	#Small Connector max wire length in blocks.
 | 
						|
	#Range: 0 ~ 256
 | 
						|
	small_connector_wire_length = 16
 | 
						|
	#Small Connector With Light energy consumption in FE/t.
 | 
						|
	#Range: > 0
 | 
						|
	small_light_connector_consumption = 1
 | 
						|
	#Large Connector max input in FE/t (Energy transfer).
 | 
						|
	#Range: > 0
 | 
						|
	large_connector_max_input = 5000
 | 
						|
	#Large Connector max output in FE/t (Energy transfer).
 | 
						|
	#Range: > 0
 | 
						|
	large_connector_max_output = 5000
 | 
						|
	#Large Connector max wire length in blocks.
 | 
						|
	#Range: 0 ~ 256
 | 
						|
	large_connector_wire_length = 32
 | 
						|
	#Ignore checking if block face can support connector.
 | 
						|
	connector_ignore_face_check = true
 | 
						|
	#Allows blocks attached to a connector to freely pass energy to and from the connector network.
 | 
						|
	connector_allow_passive_io = true
 | 
						|
 | 
						|
#Accumulator
 | 
						|
[accumulator]
 | 
						|
	#Accumulator max input in FE/t (Energy transfer).
 | 
						|
	#Range: > 0
 | 
						|
	accumulator_max_input = 5000
 | 
						|
	#Accumulator max output in FE/t (Energy transfer).
 | 
						|
	#Range: > 0
 | 
						|
	accumulator_max_output = 5000
 | 
						|
	#Accumulator internal capacity per block in FE.
 | 
						|
	#Range: > 0
 | 
						|
	accumulator_capacity = 2000000
 | 
						|
	#Accumulator max multiblock height.
 | 
						|
	#Range: 1 ~ 8
 | 
						|
	accumulator_max_height = 5
 | 
						|
	#Accumulator max multiblock width.
 | 
						|
	#Range: 1 ~ 8
 | 
						|
	accumulator_max_width = 3
 | 
						|
 | 
						|
#Portable Energy Interface
 | 
						|
[portable_energy_interface]
 | 
						|
	#PEI max input in FE/t (Energy transfer).
 | 
						|
	#Range: > 0
 | 
						|
	pei_max_input = 5000
 | 
						|
	#PEI max output in FE/t (Energy transfer).
 | 
						|
	#Range: > 0
 | 
						|
	pei_max_output = 5000
 | 
						|
 | 
						|
#Tesla Coil
 | 
						|
[tesla_coil]
 | 
						|
	#Tesla Coil max input in FE/t (Energy transfer).
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_max_input = 10000
 | 
						|
	#Tesla Coil charge rate in FE/t.
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_charge_rate = 5000
 | 
						|
	#Tesla Coil charge rate in FE/t for recipes.
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_recipe_charge_rate = 2000
 | 
						|
	#Tesla Coil internal capacity in FE.
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_capacity = 40000
 | 
						|
	#Energy consumed when Tesla Coil is fired (in FE).
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_hurt_energy_required = 1000
 | 
						|
	#Hurt range (in blocks/meters).
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_hurt_range = 3
 | 
						|
	#Damaged dealt to mobs when Tesla Coil is fired (in half hearts).
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_hurt_mob = 3
 | 
						|
	#The duration of the Shocked effect for mobs (in ticks).
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_effect_time_mob = 20
 | 
						|
	#Damaged dealt to players when Tesla Coil is fired (in half hearts).
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_hurt_player = 2
 | 
						|
	#The duration of the Shocked effect for players (in ticks).
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_effect_time_player = 20
 | 
						|
	#Tesla Coil fire interval (in ticks).
 | 
						|
	#Range: > 0
 | 
						|
	tesla_coil_fire_cooldown = 20
 | 
						|
 | 
						|
#Misc
 | 
						|
[misc]
 | 
						|
	#Diamond Grit Sandpaper durability (number of uses).
 | 
						|
	#Range: > 3
 | 
						|
	diamond_grit_sandpaper_uses = 1024
 | 
						|
	#Barbed Wire Damage.
 | 
						|
	#Range: 0.0 ~ 3.4028234663852886E38
 | 
						|
	barbed_wire_damage = 2.0
 | 
						|
 |