151 lines
		
	
	
		
			4.2 KiB
		
	
	
	
		
			TOML
		
	
	
	
	
	
			
		
		
	
	
			151 lines
		
	
	
		
			4.2 KiB
		
	
	
	
		
			TOML
		
	
	
	
	
	
| 
 | |
| #Make sure config changes are duplicated on both Clients and the Server when running a dedicated Server,
 | |
| # as the config isnt synced between Clients and Server.
 | |
| #General Settings
 | |
| [general]
 | |
| 	#Forge Energy conversion rate (in FE/t at 256 RPM, value is the FE/t generated and consumed is at 256rpm).
 | |
| 	#Range: > 0
 | |
| 	fe_at_max_rpm = 480
 | |
| 	#Max stress for the Alternator and Electric Motor (in SU at 256 RPM).
 | |
| 	#Range: > 0
 | |
| 	max_stress = 16384
 | |
| 	#If audio should be enabled or not.
 | |
| 	audio_enabled = true
 | |
| 
 | |
| #Electric Motor
 | |
| [electric_motor]
 | |
| 	#Electric Motor min/max RPM.
 | |
| 	#Range: > 1
 | |
| 	motor_rpm_range = 256
 | |
| 	#Electric Motor minimum required energy consumption in FE/t.
 | |
| 	#Range: > 0
 | |
| 	motor_min_consumption = 8
 | |
| 	#Electric Motor max input in FE (Energy transfer not consumption).
 | |
| 	#Range: > 0
 | |
| 	motor_max_input = 5000
 | |
| 	#Electric Motor internal capacity in FE.
 | |
| 	#Range: > 0
 | |
| 	motor_capacity = 5000
 | |
| 
 | |
| #Alternator
 | |
| [alternator]
 | |
| 	#Alternator max input in FE (Energy transfer, not generation).
 | |
| 	#Range: > 0
 | |
| 	generator_max_output = 5000
 | |
| 	#Alternator internal capacity in FE.
 | |
| 	#Range: > 0
 | |
| 	generator_capacity = 5000
 | |
| 	#Alternator efficiency relative to base conversion rate.
 | |
| 	#Range: 0.01 ~ 1.0
 | |
| 	generator_efficiency = 0.75
 | |
| 
 | |
| #Rolling Mill
 | |
| [rolling_mill]
 | |
| 	#Rolling Mill duration in ticks.
 | |
| 	#Range: > 0
 | |
| 	rolling_mill_processing_duration = 120
 | |
| 	#Rolling Mill base stress impact.
 | |
| 	#Range: 0 ~ 1024
 | |
| 	rolling_mill_stress = 8
 | |
| 
 | |
| #Wires
 | |
| [wires]
 | |
| 	#Small Connector max input in FE/t (Energy transfer).
 | |
| 	#Range: > 0
 | |
| 	small_connector_max_input = 1000
 | |
| 	#Small Connector max output in FE/t (Energy transfer).
 | |
| 	#Range: > 0
 | |
| 	small_connector_max_output = 1000
 | |
| 	#Small Connector max wire length in blocks.
 | |
| 	#Range: 0 ~ 256
 | |
| 	small_connector_wire_length = 16
 | |
| 	#Small Connector With Light energy consumption in FE/t.
 | |
| 	#Range: > 0
 | |
| 	small_light_connector_consumption = 1
 | |
| 	#Large Connector max input in FE/t (Energy transfer).
 | |
| 	#Range: > 0
 | |
| 	large_connector_max_input = 5000
 | |
| 	#Large Connector max output in FE/t (Energy transfer).
 | |
| 	#Range: > 0
 | |
| 	large_connector_max_output = 5000
 | |
| 	#Large Connector max wire length in blocks.
 | |
| 	#Range: 0 ~ 256
 | |
| 	large_connector_wire_length = 32
 | |
| 	#Ignore checking if block face can support connector.
 | |
| 	connector_ignore_face_check = true
 | |
| 	#Allows blocks attached to a connector to freely pass energy to and from the connector network.
 | |
| 	connector_allow_passive_io = true
 | |
| 
 | |
| #Accumulator
 | |
| [accumulator]
 | |
| 	#Accumulator max input in FE/t (Energy transfer).
 | |
| 	#Range: > 0
 | |
| 	accumulator_max_input = 5000
 | |
| 	#Accumulator max output in FE/t (Energy transfer).
 | |
| 	#Range: > 0
 | |
| 	accumulator_max_output = 5000
 | |
| 	#Accumulator internal capacity per block in FE.
 | |
| 	#Range: > 0
 | |
| 	accumulator_capacity = 2000000
 | |
| 	#Accumulator max multiblock height.
 | |
| 	#Range: 1 ~ 8
 | |
| 	accumulator_max_height = 5
 | |
| 	#Accumulator max multiblock width.
 | |
| 	#Range: 1 ~ 8
 | |
| 	accumulator_max_width = 3
 | |
| 
 | |
| #Portable Energy Interface
 | |
| [portable_energy_interface]
 | |
| 	#PEI max input in FE/t (Energy transfer).
 | |
| 	#Range: > 0
 | |
| 	pei_max_input = 5000
 | |
| 	#PEI max output in FE/t (Energy transfer).
 | |
| 	#Range: > 0
 | |
| 	pei_max_output = 5000
 | |
| 
 | |
| #Tesla Coil
 | |
| [tesla_coil]
 | |
| 	#Tesla Coil max input in FE/t (Energy transfer).
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_max_input = 10000
 | |
| 	#Tesla Coil charge rate in FE/t.
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_charge_rate = 5000
 | |
| 	#Tesla Coil charge rate in FE/t for recipes.
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_recipe_charge_rate = 2000
 | |
| 	#Tesla Coil internal capacity in FE.
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_capacity = 40000
 | |
| 	#Energy consumed when Tesla Coil is fired (in FE).
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_hurt_energy_required = 1000
 | |
| 	#Hurt range (in blocks/meters).
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_hurt_range = 3
 | |
| 	#Damaged dealt to mobs when Tesla Coil is fired (in half hearts).
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_hurt_mob = 3
 | |
| 	#The duration of the Shocked effect for mobs (in ticks).
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_effect_time_mob = 20
 | |
| 	#Damaged dealt to players when Tesla Coil is fired (in half hearts).
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_hurt_player = 2
 | |
| 	#The duration of the Shocked effect for players (in ticks).
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_effect_time_player = 20
 | |
| 	#Tesla Coil fire interval (in ticks).
 | |
| 	#Range: > 0
 | |
| 	tesla_coil_fire_cooldown = 20
 | |
| 
 | |
| #Misc
 | |
| [misc]
 | |
| 	#Diamond Grit Sandpaper durability (number of uses).
 | |
| 	#Range: > 3
 | |
| 	diamond_grit_sandpaper_uses = 1024
 | |
| 	#Barbed Wire Damage.
 | |
| 	#Range: 0.0 ~ 3.4028234663852886E38
 | |
| 	barbed_wire_damage = 2.0
 | |
| 
 |